6.9. Memory Hierarchy¶
6.9.1. The L1 Caches¶
Each CPU tile has an L1 instruction cache and L1 data cache. The size and
associativity of these caches can be configured. The default RocketConfig
uses 16 KiB, 4-way set-associative instruction and data caches. However,
if you use the NMedCores
or NSmallCores
configurations, you can
configure 4 KiB direct-mapped caches for L1I and L1D.
class SmallRocketConfig extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new freechips.rocketchip.subsystem.WithNSmallCores(1) ++ // small rocket cores
new freechips.rocketchip.system.BaseConfig)
class MediumRocketConfig extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new freechips.rocketchip.subsystem.WithNMedCores(1) ++ // medium rocket cores
new freechips.rocketchip.system.BaseConfig)
If you only want to change the size or associativity, there are configuration mixins for those too.
import freechips.rocketchip.subsystem.{WithL1ICacheSets, WithL1DCacheSets, WithL1ICacheWays, WithL1DCacheWays}
class MyL1RocketConfig extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new WithL1ICacheSets(128) ++ // change rocket I$
new WithL1ICacheWays(2) ++ // change rocket I$
new WithL1DCacheSets(128) ++ // change rocket D$
new WithL1DCacheWays(2) ++ // change rocket D$
new freechips.rocketchip.subsystem.WithNSmallCores(1) ++
new freechips.rocketchip.system.BaseConfig)
You can also configure the L1 data cache as an data scratchpad instead. However, there are some limitations on this. If you are using a data scratchpad, you can only use a single core and you cannot give the design an external DRAM. Note that these configurations fully remove the L2 cache and mbus.
class SmallRocketConfigNoL2 extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new freechips.rocketchip.subsystem.WithNSmallCores(1) ++
new freechips.rocketchip.system.BaseConfig)
class ScratchpadRocketConfig extends Config(
new freechips.rocketchip.subsystem.WithNoMemPort ++
new freechips.rocketchip.subsystem.WithNMemoryChannels(0) ++
new freechips.rocketchip.subsystem.WithNBanks(0) ++
new freechips.rocketchip.subsystem.WithScratchpadsOnly ++
new SmallRocketConfigNoL2)
This configuration fully removes the L2 cache and memory bus by setting the number of channels and number of banks to 0.
6.9.2. The SiFive L2 Cache¶
The default RocketConfig provided in the Chipyard example project uses SiFive’s InclusiveCache generator to produce a shared L2 cache. In the default configuration, the L2 uses a single cache bank with 512 KiB capacity and 8-way set-associativity. However, you can change these parameters to obtain your desired cache configuration. The main restriction is that the number of ways and the number of banks must be powers of 2.
import freechips.rocketchip.subsystem.WithInclusiveCache
class MyCacheRocketConfig extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new WithInclusiveCache( // add 1MB, 4-way, 4-bank cache
capacityKB = 1024,
nWays = 4,
nBanks = 4) ++
new freechips.rocketchip.subsystem.WithNSmallCores(1) ++
new freechips.rocketchip.system.BaseConfig)
6.9.3. The Broadcast Hub¶
If you do not want to use the L2 cache (say, for a resource-limited embedded
design), you can create a configuration without it. Instead of using the L2
cache, you will instead use RocketChip’s TileLink broadcast hub.
To make such a configuration, you can just copy the definition of
RocketConfig
but omit the WithInclusiveCache
mixin from the
list of included mixims.
class CachelessRocketConfig extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new freechips.rocketchip.subsystem.WithNBigCores(1) ++
new freechips.rocketchip.system.BaseConfig)
If you want to reduce the resources used even further, you can configure the Broadcast Hub to use a bufferless design.
import freechips.rocketchip.subsystem.WithBufferlessBroadcastHub
class BufferlessRocketConfig extends Config(
new WithBufferlessBroadcastHub ++
new CachelessRocketConfig)
6.9.4. The Outer Memory System¶
The L2 coherence agent (either L2 cache or Broadcast Hub) makes requests to an outer memory system consisting of an AXI4-compatible DRAM controller.
The default configuration uses a single memory channel, but you can configure the system to use multiple channels. As with the number of L2 banks, the number of DRAM channels is restricted to powers of two.
import freechips.rocketchip.subsystem.WithNMemoryChannels
class DualChannelRocketConfig extends Config(
new WithTSI ++
new WithNoGPIO ++
new WithBootROM ++
new WithUART ++
new freechips.rocketchip.subsystem.WithNoMMIOPort ++
new freechips.rocketchip.subsystem.WithNoSlavePort ++
new WithNMemoryChannels(2) ++ // multi-channel outer mem
new freechips.rocketchip.subsystem.WithNBigCores(1) ++
new freechips.rocketchip.system.BaseConfig)
In VCS and Verilator simulation, the DRAM is simulated using the
SimAXIMem
module, which simply attaches a single-cycle SRAM to each
memory channel.
If you want a more realistic memory simulation, you can use FireSim, which can simulate the timing of DDR3 controllers. More documentation on FireSim memory models is available in the FireSim docs.